• 測量原理的選擇不受壓力、密度、溫度和粘度的限制

• 適用于苛刻工況下的衛生型測量

儀表特性

• PFA內襯

• 傳感器外殼采用不銹鋼材質 (3A, EHEDG)

• 接液部分材質耐 CIP, SIP清洗

• 回路供電技術

• 高防護等級：IP69K

• 工廠安全性：全球認證 (SIL, Haz. area)

   

   

  特征和規格

  測量原理電磁開關產品標題The flowmeter for smallest flow rates with genuine loop‐powered technology. For demanding hygienic applications.
  傳感器特點Flexible installation concept – numerous hygienic process connections. Energy‐saving flow measurement – no pressure loss due to crosssection constriction. Maintenance‐free – no moving parts. Liner made of PFA. Sensor housing made of stainless steel (3-A, EHEDG).
  變送器特點Convenient device wiring – separate connection compartment. Safe operation – no need to open the device due to display with touch control, background lighting. Integrated verification – Heartbeat Technology. Loop‐powered technology. Robust dual‐compartment housing.
  公稱口徑范圍DN 2 to 25 (¹⁄ to 1")
  接液部件材質Liner: PFA
  Electrodes: 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022); Tantalum; Platinum
  測量變量Volume flow, mass flow
  *大測量誤差Volume flow: ±0.5 % o.r. ± 2 mm/s (0.08 in/s)
  測量范圍0.06 dm³/min to 300 m³/h (0.015 to 80 gal/min)
  *大過程壓力PN 40, Class 150, 20K
  介質溫度范圍–20 to +150 °C (–4 to +302 °F)
  環境溫度范圍–40 to +60 °C (–40 to +140 °F)
  傳感器外殼材質1.4301 (304), corrosion resistant
  變送器外殼材質AlSi10Mg, coated
  防護等級IP66/67, type 4X enclosure
  顯示/操作4‐line backlit display with touch control (operation from outside)
  Configuration via local display and operating tools possible
  Remote display available
  輸出4‐20 mA HART (passive)
  Pulse/frequency/switch output (passive)
  輸入None
  數字式通信HART, PROFIBUS PA, FOUNDATION Fieldbus
  電源DC 18 to 35 V (4‐20 mA HART with/without pulse/frequency/switch output)
  危險區認證ATEX, IECEx, cCSAus, INMETRO, NEPSI, EAC
  產品安全性CE, C-Tick
  功能安全性Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
  計量認證和證書Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) 
  Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV attestation)
  壓力認證和證書CRN
  船級證書3.1 material
  衛生型認證和證書3-A, EHEDG